Silicone products are a kind of product that many people love. Silicone products are widely used and can be applied in many fields. The silicone products factory produces silicone products, the production of silicone products There are many processes. One process of silicone product production is vulcanization. Today Beikang Silicone will take you to understand the vulcanization temperature of silicone product molding and its impact. Please take a look at it.
1. When the vulcanization temperature of silicone products is too high, the problem is likely to occur.
Vulcanization temperature is too high easily leads to a product lack of glue, and size is small, thickness is thick, deformation, numb, brittle, easy to break, difficult to remove the edge of the bad, for silicone keys, but also very easy to cause the load is high bad. Another more interesting phenomenon when the vulcanization temperature is too high, is also very easy to appear package wind.
2. When the vulcanization temperature of silicone products is too low when the problem is likely to occur.
The problems that occur when the vulcanization temperature is too low are the opposite of the high vulcanization temperature, which can easily lead to the small size of silicone products, thin thickness, incomplete vulcanization, soft and other bad, and for silicone keys, it is also easy to cause low load, black particles off and other bad.
But there are also a few points similar to the high vulcanization temperature: it is difficult to remove the edge, package wind, and other problems. The vulcanization temperature of silicone products should be set at a reasonable range; too high and too low will affect the quality of silicone products when molding, so it must be strictly controlled during production.
The IPQC of the silicone products factory can also be better equipped with a table to measure the mold temperature of each machine on time. If there is any abnormality, it should be improved immediately to reduce the badness caused by the vulcanization temperature to a lower degree.
When molding silicone products, the vulcanization temperature is too high or too low will lead to problems with silicone products; the process of silicone products is very strict and needs to be carefully implemented by the standards.
